Use our easy calculator to order your custom-made shade sail, then have it delivered to your doorstep.

shape
  • texture
    Platinum
  • texture
    Cafe Noir
  • texture
    Cappucino
  • texture
    Slate Grey
  • texture
    Yellow
  • texture
    Porcelain
  • texture
    Copper
  • texture
    Blue Gum
  • texture
    Merlot
  • texture
    Light Green
  • texture
    Black
  • texture
    Midnight green
  • texture
    Aqua Marine
  • texture
    Sandstone
  • texture
    Rust
Select Shape
  • 3 – sided
    shape
  • 4 – sided
    shape
  • 5 – sided
    shape
  • 6 – sided
    shape
  • other
    shape
Change Measurement Unit
  • metric
  • imperial
* = Required fields
a b * mm
b c * mm
C A * mm

TotalAUD $0.00


Cloth Colour *
Webbing Colour *

CUSTOM SHADE SAILS – MEASURING PROCEDURE

This method of obtaining Shade Sail measurements for custom made sails must be followed to enable the correct design and fabrication of your shade sail.

By following the attached procedure you will greatly assist in the reduction of shade sail manufacturing errors caused by confusion between the person measuring the Shade Sail and the persons designing and manufacturing the Shade Sail.

METHOD:

All measurements should be taken from fixing point to fixing
point (ie: eye to eye).
We will make necessary reductions for fixings and stretch.

UNITS:

All measurements on drawings to be in millimeters OR feet and inches

ACCURACY:

All measurements to be to the nearest 10mm or nearest 1/2 inch.
All outside perimeter measurements are required and please supply as many diagonal measurements in addition to those *REQUIRED as possible. Diagonal dimensions are critical in the fabrication/design process to facilitate the manufacture of a correct fitting Shade sail.

order custom made shade sails online

4 perimeter measurements plus 2 diagonals NOTE: One diagonal is * REQUIRED
IE: A 4 sided Shade Sail requires six measurements.

6 perimeter measurements plus 9 diagonals NOTE: 3 diagonals are * REQUIRED
and a six sided ShadeSail requires 15 measurements.

IMPORTANT!!

Measurements are to be taken from fixing point to fixing point as shown.

These MUST be
Actual  dimensions from your mounting point to mounting point.

We will make necessary reductions for fixings and stretch.