CUSTOM SHADE SAILS MEASURING PROCEDURE

This method of obtaining shade sail measurements for custom-made sails must be followed to enable the correct design and fabrication of your shade sail.

By following the attached procedure you will greatly assist in the reduction of shade sail manufacturing errors caused by confusion between the person measuring the shade sail and the person designing and manufacturing the shade sail.

METHOD:

All measurements should be taken from fixing point to fixing
point (ie: eye to eye).

We will make necessary reductions for fixings and stretch.

UNITS:

All measurements on drawings are to be in millimeters OR feet and inches.

ACCURACY:

All measurements are to be to the nearest 10mm or nearest 1/2 inch.

All outside perimeter measurements are required and please supply as many diagonal measurements in addition to those *REQUIRED as possible.

Diagonal dimensions are critical in the fabrication/design process to facilitate the manufacture of a correct fitting shade sail.

Shade sails online order custom products
Measure 4side2

4 perimeter measurements plus 2 diagonals
NOTE: One diagonal is * REQUIRED
IE: A 4 sided Shade Sail requires six measurements.

Measure 6sideclr

6 perimeter measurements plus 9 diagonals
NOTE: 3 diagonals are * REQUIRED
and a six sided ShadeSail requires 15 measurements.

Custom made shades sails eyebolts

Measurements are to be taken from fixing point to fixing point as shown.

These MUST be Actual dimensions from your mounting point to the mounting point.

We will make necessary reductions for fixings and stretch.

Shadesail measuring guideline pdf by Shade Sails Online
Dowload.pdf